Brocade VDX 6740 Hardware Reference Manual (Supporting VDX 6740, VDX 6740T, and VDX 6740T-1G) - Manual (Page 23)

Brocade VDX 6740 Hardware Reference Manual 11
53_1002829_02
Verifying operation
2
NOTE
Power is supplied to the switch as soon as the first power supply is connected and powered on.
3. After POST is complete, verify that the switch power and status LEDs on the port side of the
switch are green.
Verifying operation
After you have powered the system on and POST is complete, verify that the switch is working
properly.
1. Verify that the power supply LEDs are solid green. Refer to Figure 9 and Figure 10 for the
location of these LEDs.
2. Verify that the system power LED and the system status LED is solid green. Refer to Figure 7
and Figure 7 and for the specific locations of these LEDs.
3. The port LEDs should be lit during POST activities. When POST is complete, only the LEDs for
ports connected to other devices should be green. Refer to Figure 7 and Figure 7 for the
specific locations of these LEDs.
Refer to Table 3 for more details on the LED patterns.