Remote defect indication, Limitations, Sample configuration of remote defect indication – Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) User Manual

Page 249

Advertising
background image

Multi-Service IronWare Administration Guide

231

53-1003028-02

CFM monitoring for ISID

6

Remote Defect Indication

Remote Defect Indication (RDI) is a single bit, is carried by CCM to convey the MEPs in MA about
reception of CCM messages by receiving MEPs (RMEP)

•

The absence of RDI in a CCM indicates that the transmitting MEP is receiving CCMs from all
remote MEPs

•

The presence of RDI indicates that transmitting MEP is not receiving CCM from one or more
RMEPs (one or more RMEP failed is in state) attached to the MEP.

•

RDI is supported for all type of VLANs

•

CVLAN, SVAN, ISID and BVLAN

•

RDI is supported for regular and sub-second CCM intervals

Limitations

•

UPMEP and MIP on C-VLAN ESI is not supported if it is a client of S-VLAN ESI (in Provider Edge).

•

UPMEP and MIP on S-VLAN ESI is not supported if it is a client of ISID ESI (in Backbone Edge).

•

Sub-second CCM interval is not supported for CES.

•

RDI is not applicable for Link MA.

Sample configuration of Remote Defect Indication

The following sample configuration shows the RDI configuration.

Brocade_DUT_1(config)#cfm-enable

Brocade_DUT_1(config-cfm)#domain-name customer level 7

Brocade_DUT_1(config-cfm-md-customer)#ma-name admin vlan-id 100 priority 7

Brocade_DUT_1(config-cfm-md-customer-ma-admin)#ccm-interval 1-second

Brocade_DUT_1(config-cfm-md-customer-ma-admin)#mep 1 down port eth 1/1

Brocade_DUT_2(config)#cfm-enable

Brocade_DUT_2(config-cfm)#domain-name customer level 7

Brocade_DUT_2(config-cfm-md-customer)#ma-name admin vlan-id 100 priority 7

Brocade_DUT_2(config-cfm-md-customer-ma-admin)#ccm-interval 1-second

Brocade_DUT_3(config)#cfm-enable

Brocade_DUT_3(config-cfm)#domain-name customer level 7

Brocade_DUT_3(config-cfm-md-customer)#ma-name admin vlan-id 100 priority 7

Brocade_DUT_3(config-cfm-md-customer-ma-admin)#ccm-interval 1-second

Brocade_DUT_3(config-cfm-md-customer-ma-admin)#mep 2 down port ethe 1/2

Brocade_DUT_4(config)#cfm-enable

Brocade_DUT_4(config-cfm)#domain-name customer level 7

Brocade_DUT_4(config-cfm-md-customer)#ma-name admin vlan-id 100 priority 7

Brocade_DUT_4(config-cfm-md-customer-ma-admin)#ccm-interval 1-second

Brocade_DUT_4(config-cfm-md-customer-ma-admin)#mep 3 down port eth 1/3

Advertising