Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) - Manual (Page 306)

288 Multi-Service IronWare Administration Guide
53-1003028-02
Basic NETCONF operations
8
<brcd:record></brcd:record>
<brcd:reoptimize-timer>3600</brcd:reoptimize-timer>
<brcd:revert-timer>43200</brcd:revert-timer>
<brcd:mpls-traffic-eng>
<brcd:max-burst>44736</brcd:max-burst>
<brcd:max-rate>6312</brcd:max-rate>
<brcd:mean-rate>1544</brcd:mean-rate>
</brcd:mpls-traffic-eng>
<brcd:secondary-path>
<brcd:name>example2</brcd:name>
</brcd:secondary-path>
</brcd:lsp>
<brcd:lsp>
<brcd:name>examplelsp2</brcd:name>
<brcd:adaptive></brcd:adaptive>
<brcd:from>10.99.10.1</brcd:from>
<brcd:to>10.99.145.1</brcd:to>
<brcd:enable></brcd:enable>
<brcd:hop-limit>10</brcd:hop-limit>
<brcd:ipmtu>1526</brcd:ipmtu>
<brcd:ldp-tunneling></brcd:ldp-tunneling>
<brcd:metric>600</brcd:metric>
<brcd:primary-path>example2</brcd:primary-path>
<brcd:record></brcd:record>
<brcd:reoptimize-timer>3600</brcd:reoptimize-timer>
<brcd:revert-timer>43200</brcd:revert-timer>
<brcd:mpls-traffic-eng>
<brcd:max-burst>44736</brcd:max-burst>
<brcd:max-rate>6312</brcd:max-rate>
<brcd:mean-rate>1544</brcd:mean-rate>
</brcd:mpls-traffic-eng>
<brcd:secondary-path>
<brcd:name>example</brcd:name>
</brcd:secondary-path>
</brcd:lsp>
<brcd:lsp>
<brcd:name>exmaplelsp</brcd:name>
<brcd:from>10.99.10.1</brcd:from>
<brcd:to>10.99.161.1</brcd:to>
<brcd:disable></brcd:disable>
<brcd:record></brcd:record>
</brcd:lsp>
</brcd:mpls-config>
</brcd:netiron-config>
</nc:data>
</nc:rpc-reply>
]]>]]>
The following is an example of a
<get-config>
operation for VLAN configuration.
<nc:rpc xmlns:nc="urn:ietf:params:xml:ns:netconf:base:1.0"
xmlns:brcd="http://brocade.com/ns/netconf/config/netiron-config/"
message-id="1">
<nc:get-config>
<nc:source>
<nc:running/>
</nc:source>
<nc:filter nc:type="subtree">
<brcd:netiron-config>
<brcd:vlan-config/>