Brocade Multi-Service IronWare Administration Guide (Supporting R05.6.00) - Manual (Page 372)

354 Multi-Service IronWare Administration Guide
53-1003028-02
Syslog messages
A
Notification OSPF intf config error, rid router-id,
intf addr ip-addr,
pkt src addr src-ip-addr,
error type error-type, pkt type pkt-type Indicates that an OSPF interface
configuration error has occurred.
The router-id is the router ID of the device.
The ip-addr is the IP address of the
interface on the device.
The src-ip-addr is the IP address of the
interface from which the device received
the error packet.
The error-type can be one of the following:
•
bad version
•
area mismatch
•
unknown NBMA neighbor
•
unknown virtual neighbor
•
authentication type mismatch
•
authentication failure
•
network mask mismatch
•
hello interval mismatch
•
dead interval mismatch
•
option mismatch
•
unknown
The packet-type can be one of the following:
•
hello
•
database description
•
link state request
•
link state update
•
link state ack
•
unknown
TABLE 72 Syslog messages OSPF (Continued)
Message level Message Explanation