Brocade TurboIron 24X Series Configuration Guide - Manual (Page 1101)

Brocade TurboIron 24X Series Configuration Guide 1067
53-1003053-01
Syslog messages
Notification OSPF nbr state changed, rid <router-id>, nbr
addr <ip-addr>, nbr rid <nbr-router-Id>, state
<ospf-state> Indicates that the state of an OSPF
neighbor has changed.
The <router-id> is the router ID of the
device.
The <ip-addr> is the IP address of the
neighbor.
The <nbr-router-id> is the router ID of the
neighbor.
The <ospf-state> indicates the state to
which the interface has changed and can
be one of the following:
•
down
•
attempt
•
initializing
•
2-way
•
exchange start
•
exchange
•
loading
•
full
•
unknown
Notification OSPF originate LSA, rid <router-id>,
area <area-id>, LSA type <lsa-type>,
LSA id <lsa-id>,
LSA router id <lsa-router-id> An OSPF interface has originated an LSA.
The <router-id> is the router ID of the
device.
The <area-id> is the OSPF area.
The <lsa-type> is the type of LSA.
The <lsa-id> is the LSA ID.
The <lsa-router-id> is the LSA router ID.
TABLE 176 Brocade Syslog messages (Continued)
Message level Message Explanation