Brocade TurboIron 24X Series Configuration Guide - Manual (Page 242)

208 Brocade TurboIron 24X Series Configuration Guide
53-1003053-01
Configuring LLDP
LLDP neighbors detail
The show lldp neighbors detail command displays the LLDP advertisements received from LLDP
neighbors.
The following shows an example show lldp neighbors detail report.
NOTE
The show lldp neighbors detail output will vary depending on the data received. Also, values that
are not recognized or do not have a recognizable format, may be displayed in hexadecimal binary
form.
Table 2:
This field... Displays...
Lcl Port The local LLDP port number.
Chassis ID The identifier for the chassis.
Devices use the base MAC address of the device as the Chassis ID.
Port ID The identifier for the port.
Devices use the permanent MAC address associated with the port as the port ID.
Port
Description The description for the port.
Devices use the ifDescr MIB object from MIB-II as the port description.
System Name The administratively-assigned name for the system.
Devices use the sysName MIB object from MIB-II, which corresponds to the CLI hostname
command setting.
NOTE: A tilde (~) at the end of a line indicates that the value in the field is too long to display in
full and is truncated.