Brocade TurboIron 24X Series Configuration Guide - Manual (Page 1103)

Brocade TurboIron 24X Series Configuration Guide 1069
53-1003053-01
Syslog messages
Notification OSPF virtual intf config error,
rid <router-id>, intf addr <ip-addr>,
pkt src addr <src-ip-addr>,
error type <error-type>, pkt type <pkt-type> Indicates that an OSPF virtual routing
interface configuration error has occurred.
The <router-id> is the router ID of the
device.
The <ip-addr> is the IP address of the
interface on the device.
The <src-ip-addr> is the IP address of the
interface from which the device received
the error packet.
The <error-type> can be one of the
following:
•
bad version
•
area mismatch
•
unknown NBMA neighbor
•
unknown virtual neighbor
•
authentication type mismatch
•
authentication failure
•
network mask mismatch
•
hello interval mismatch
•
dead interval mismatch
•
option mismatch
•
unknown
The <packet-type> can be one of the
following:
•
hello
•
database description
•
link state request
•
link state update
•
link state ack
•
unknown
Notification OSPF virtual intf rcvd bad pkt,
rid <router-id>, intf addr <ip-addr>,
pkt src addr <src-ip-addr>,
pkt type <pkt-type> Indicates that an OSPF interface received a
bad packet.
The <router-id> is the router ID of the
device.
The <ip-addr> is the IP address of the
interface on the device.
The <src-ip-addr> is the IP address of the
interface from which the device received
the authentication failure.
The <packet-type> can be one of the
following:
•
hello
•
database description
•
link state request
•
link state update
•
link state ack
•
unknown
TABLE 176 Brocade Syslog messages (Continued)
Message level Message Explanation