Brocade Fabric OS Encryption Administrator’s Guide Supporting NetApp Lifetime Key Manager (LKM) and KeySecure Storage Secure Key Manager (SSKM) Environments (Supporting Fabric OS v7.2.0) - Manual (Page 112)

94 Fabric OS Encryption Administrator’s Guide (LKM/SSKM)
53-1002925-01
Viewing and editing switch encryption properties
2
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Properties icon.
The Encryption Switch Properties dialog box displays. (Refer to Figure 72 .)
FIGURE 72 Encryption Switch Properties dialog box
The Encryption Switch Properties dialog box contains the following information:
• Switch Properties table: A list of properties associated with the selected switch
- Name: The name of the selected switch
- Node WWN: The world wide name of the node
- Switch Status: The health status of the switch. Options are:
• Healthy
• Marginal
• Down
• Unknown
• Unmonitored
• Unreachable
- Switch Membership Status: The alert or informational message description, which details
the health status of the switch. Options are: