Brocade Fabric OS Encryption Administrator’s Guide Supporting NetApp Lifetime Key Manager (LKM) and KeySecure Storage Secure Key Manager (SSKM) Environments (Supporting Fabric OS v7.2.0) User Manual
Page 59
Fabric OS Encryption Administrator’s Guide (LKM/SSKM)
41
53-1002925-01
Creating an encryption group
2
FIGURE 23
Select Security Settings dialog box
6. Set quorum size and system card requirements.
The quorum size is the minimum number of cards necessary to enable the card holders to
perform the security sensitive operations listed above. The maximum quorum size is five cards.
The actual number of authentication cards registered is always more than the quorum size, so
if you set the quorum size to five, for example, you will need to register at least six cards in the
subsequent steps.
Setting quorum size to a value greater than zero and/or setting system cards to Required
launches additional wizard dialog boxes.
7. Click Next.
The Confirm Configuration dialog box displays. (Refer to
.) Confirm the encryption
group name and switch public key certificate file name you specified are correct, then click
Next.