Brocade Fabric OS Encryption Administrator’s Guide Supporting NetApp Lifetime Key Manager (LKM) and KeySecure Storage Secure Key Manager (SSKM) Environments (Supporting Fabric OS v7.2.0) - Manual (Page 54)

36 Fabric OS Encryption Administrator’s Guide (LKM/SSKM)
53-1002925-01
Creating an encryption group
2
4. From the Configure Switch Encryption welcome screen, click Next to begin.
The Designate Switch Membership dialog box displays. (Refer to Figure 18 .) The dialog box
contains the following options:
• Create a new encryption group containing just the switch: Creates an encryption group for
the selected switch
• Add this switch to an existing encryption group: Adds the selected switch to an encryption
group that already exists
FIGURE 18 Designate Switch Membership dialog box
5. For this procedure, verify that Create a new encryption group containing just this switch is
selected, then click Next.
NOTE
If you are adding a switch to an encryption, refer to “Adding a switch to an encryption group” on
page 44.
The Create a New Encryption Group dialog box displays. (Refer to Figure 19 .)