Brocade Fabric OS Encryption Administrator’s Guide Supporting NetApp Lifetime Key Manager (LKM) and KeySecure Storage Secure Key Manager (SSKM) Environments (Supporting Fabric OS v7.2.0) - Manual (Page 65)

Fabric OS Encryption Administrator’s Guide (LKM/SSKM) 47
53-1002925-01
Adding a switch to an encryption group
2
6. Enter the location where you want to store the public key certificate that is used to
authenticate connections to the key vault, or browse to the desired location, then click Next.
The Confirm Configuration dialog box displays. (Refer to Figure 31 .) Confirm the encryption
group name and switch public key certificate file name you specified are correct, then click
Next.
FIGURE 31 Confirm Configuration dialog box
The Configuration Status dialog box displays. (Refer to Figure 32 .)
FIGURE 32 Configuration Status dialog box