Brocade Fabric OS Encryption Administrator’s Guide Supporting NetApp Lifetime Key Manager (LKM) and KeySecure Storage Secure Key Manager (SSKM) Environments (Supporting Fabric OS v7.2.0) - Manual (Page 66)

48 Fabric OS Encryption Administrator’s Guide (LKM/SSKM)
53-1002925-01
Adding a switch to an encryption group
2
All configuration items have green check marks if the configuration is successful. A red stop
sign indicates a failed step. A message displays below the table, indicating the encryption
switch was added to the group you named, and the public key certificate is stored in the
location you specified.
7. Review important messages, then click Next.
The Error Instructions dialog box displays. (Refer to Figure 33 .) Instructions for installing public
key certificates for the encryption switch are displayed. These instructions are specific to the
key vault type.
FIGURE 33 Error Instructions dialog box
8. Review the post-configuration instructions, which you can copy to a clipboard or print for later.
9. Click Finish to exit the Configure Switch Encryption wizard.