Brocade Fabric OS Encryption Administrator’s Guide Supporting NetApp Lifetime Key Manager (LKM) and KeySecure Storage Secure Key Manager (SSKM) Environments (Supporting Fabric OS v7.2.0) - Manual (Page 95)

Fabric OS Encryption Administrator’s Guide (LKM/SSKM) 77
53-1002925-01
Tape LUN statistics
2
FIGURE 59 Target Tape LUNs dialog box
4. Select the LUN or LUNs for which to display or clear statistics, then click Statistics.
The Tape LUN Statistics dialog box displays. (Refer to Figure 60 .) The statistic results based on
the LUN or LUNs you selected is displayed. Tape LUN statistics are cumulative.
FIGURE 60 Tape LUN Statistics dialog box
The Tape LUN Statistics dialog box contains the following information:
• LUN #: The number of the logical unit for which statics are displayed.
• Tape Volume/Pool: The tape volume label of the currently-mounted tape, if a tape session
is currently in progress.
• Tape Session #: The number of the ongoing tape session.
• Uncompressed blocks: The number of uncompressed blocks written to tape.
• Compressed blocks: The number of compressed blocks written to tape.
• Uncompressed Bytes: The number of uncompressed bytes written to tape.
• Compressed Bytes: The number of compressed bytes written to tape.
• Host Port WWN: The WWN of the host port that is being used for the write operation.