Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 254)

204 Brocade Network Advisor SAN User Manual
53-1002948-01
Performance monitors
7
Top Port Link Resets monitor
The Top Port Link Resets monitor ( Figure 71 ) displays the top ports with link resets in a table.
FIGURE 71 Top Port Link Resets monitor
The Top Port Link Resets monitor includes the following data:
• Severity icon/monitor title — The worst severity of the data based on the error count shown
next to the monitor title.
• Port — The port affected by this monitor.
• Connected_Port_Link (where Connected_Port_Link is Connected Port, Initiator, or Target) —
Displays one of the following:
- Connected Port — The ISL or IFL port on the connected device. Click to launch the switch
port properties dialog box.
- Initiator — The initiator port on the connected device. Click to launch the device properties
dialog box.
- Target — The target port on the connected device. Click to launch the device properties
dialog box.
• RX Link Resets /sec — The number (error rate) receive link reset errors per second for the
duration specified in the monitor.
• RX Link Resets — The number (error count) of receive link reset errors.
• TX Link Resets/sec — The number (error rate) of transmit link reset errors for the duration
specified in the monitor.
• TX Link Resets — The number (error count) of transmit link reset errors.
• Product — The product affected by this monitor.
• Type — The type of port (for example, U-Port).
• Identifier — The port identifier.
• Port Number — The port number.
• State — The port state (for example, Enabled).