Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 379)

Brocade Network Advisor SAN User Manual 329
53-1002948-01
AAA Settings tab
11
1. Select the AAA Settings tab ( Figure 116 ).
FIGURE 116 AAA Settings tab
2. Select Radius Server from the Primary Authentication list.
3. Add or edit a Radius server by referring to “Configuring a Radius server” on page 330.
4. Rearrange the Radius servers in the table by selecting a server and click the Up or Down
button to move it.
5. Delete a Radius server by selecting the server and click Delete.
6. Test the established active connection with the Radius server by clicking Test.
Test attempts to contact the Radius server by issuing a ping command.
7. Set secondary authentication by selecting one of the following options from the Secondary
Authentication list:
• Local Database
• None
8. Set the fall back condition to secondary authentication by selecting one of the following
options from the Fail Over Option list:
• Radius Servers Not Reachable
• Radius Authentication Failed
9. Set the authorization preference by selecting one of the following options from the
Authorization Preference list:
• Local Database
• Primary Authentication Server
10. Click Apply to save the configuration.
To display the authentication audit trail, refer to “Displaying the client authentication audit
trail” on page 341.
11. Click Close to close the Server Management Console.