Brocade Network Advisor SAN User Manual v12.1.0 - Manual (Page 723)

Brocade Network Advisor SAN User Manual 675
53-1002948-01
Adding a switch to an encryption group
20
4. For this procedure, select Add this switch to an existing encryption group, then click Next.
The Add Switch to Existing Encryption Group dialog box displays. (Refer to Figure 290 .)
The dialog box contains the following information:
• Encryption Groups table: Enables you to select an encryption group in which to add a
switch.
• Member Switches table: Lists the switches in the selected encryption group.
NOTE
If you are creating a new encryption group, refer to “Creating a new encryption group” on
page 636.
FIGURE 290 Add Switch to Existing Encryption Group dialog box
5. Select the group in which to add the switch, then click Next.
The Specify Public Key Certificate (KAC) File Name dialog box displays. (Refer to Figure 291 .)