Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 1420)

1368 Brocade Network Advisor SAN User Manual
53-1003154-01
MAPS groups
33
FIGURE 580 Add Group dialog box
i. Enter a unique name for the group in the Name field.
The name can be up to 32 characters and can only contain alphanumeric and
underscore characters.
ii. Add objects to the group by selecting the object (port or circuit) in the Available
Ports/Circuits list and clicking the right arrow button.
The selected objects move from the Available Ports/Circuits list to the Selected
Ports/Circuits list.
iii. Remove objects from the group by selecting the object (port or circuit) in the Selected
Ports/Circuits list and clicking the left arrow button.
The selected objects move from the Selected Ports/Circuits list to the Available
Ports/Circuits list.
4. Click OK on the Add Group dialog box.
The new group displays in the Custom Groups folder of the Rules area.
5. Configure policies and rules for the group. For more information, refer to “Configuring a MAPS
policy” on page 1353.
6. Click OK on the Add Policy dialog box.
7. Click Close on the MAPS Configuration dialog box.