Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 144)

92 Brocade Network Advisor SAN User Manual
53-1003154-01
Flyover settings
4
FIGURE 28 Options dialog box (Flyovers pane, Product tab)
a. Select the protocol type from the Type list, if necessary.
b. Select each property you want to display in the product flyover from the Available
Properties table.
Depending on which protocol you select, some of the following properties may not be
available:
FC (default)
c. Click the right arrow to move the selected properties to the Selected Properties table.
d. Use the Move Up and Move Down buttons to reorder the properties in the Selected
Properties table, if necessary.
The properties displayed in the Selected Properties table appear in the flyover display.
6. Remove product properties you do not want to display on flyover by selecting the property in the
Selected Properties table and clicking the left arrow.
•
Name
•
Device Type
•
WWN
•
IP Address
•
Domain ID
•
Class
•
Tag#
•
Serial #
•
Vendor
•
Model #
•
Port Count
•
Seed Switch
•
Firmware
•
Location
•
Contact
•
Description
•
Management Link
•
Operational Status
•
Enclosure
•
Reason
•
FID
•
Base Fabric for Transport
•
Base Switch
•
Zone Alias