Brocade Network Advisor SAN User Manual v12.3.0 - Manual (Page 98)

46 Brocade Network Advisor SAN User Manual
53-1003154-01
Troubleshooting fabric discovery
3
The Discovery Status field details the actual status message text, which varies depending on
the situation. The following are samples of actual status messages:
• Discovered: Seed Switch: Not registered for SNMP Traps
• Discovered: Seed Switch: Not Manageable: Not registered for SNMP Traps
• Discovered: Current seed switch is not recommended. Change Seed Switch. : Seed Switch:
Not registered for SNMP Traps
• New Discovery Pending
Troubleshooting fabric discovery
If you encounter discovery problems, complete the following checklist to ensure that discovery was
set up correctly.
1. Verify IP connectivity by issuing a ping command to the switch.
a. Open the command prompt.
b. From the Server, type
ping Switch_IP_Address .
2. Enter the IP address of the device in a browser to verify the http reachability.
For example, http://10.1.1.11.
Managed count exceeded troubleshooting
The following section states possible issues and the recommended solution when you exceed your
managed count limits.