Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) - Manual (Page 126)

114 Brocade Virtual ADX Graphical User Interface Guide
53-1003242-01
Content switching
7
The Response Rules page is displayed, as shown in Figure 90 .
FIGURE 90 Response rules summary
The Response Rules page displays the list of the configured response rules for outgoing traffic.
Creating response rules
The Brocade Virtual ADX can perform content rewrite on the server responses. In other words, the
Brocade Virtual ADX can not only modify requests in the forward direction, but also the responses
in reverse direction. The HTTP response is divided into the header part and the body part. The
Brocade Virtual ADX can selectively rewrite the header, body, or both.
To create a response rule for outgoing traffic on the Brocade Virtual ADX, perform the following
steps within the Configure tab.
1. Click Traffic on the menu bar.
2. From the sidebar, select Content Switching, and then select Response Rules.
The Response Rules page is displayed, as shown in Figure 90 .