Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) User Manual
Page 99
Brocade Virtual ADX Graphical User Interface Guide
87
53-1003242-01
Server groups
7
FIGURE 71
Server group summary
The Server Groups page displays a list of configured real server groups. Each entry in the list
includes name of the group, ports added, bound virtual server and ports, and number of real
servers.
3. Click New at the bottom of the Server Groups page.
The Configure Server Group page tab is displayed, as shown in
.
FIGURE 72
Configuring a server group
4. Provide the following information:
•
Server Group Name: Enter the name of the server group.
•
Add Real Servers: Select the real servers from the Available Servers list and click Add to
move the real servers to the Selected Servers list to add server group.
To modify the configured server groups, in the summary table, select an entry and click Edit or
double-click the entry. You can also delete a configuration by clicking Delete or launch the virtual
servers that are bound to the server group by clicking Virtual Servers.
For more information on configuring server groups, refer to the Brocade Virtual ADX Server Load
Balancing Guide.