Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) User Manual
Page 165
Brocade Virtual ADX Graphical User Interface Guide
153
53-1003242-01
Access Control Lists
9
3. Click New IPv4 Extended ACL at the bottom of the ACL Summary page.
The ACL IPv4 Extended - new page is displayed, as shown in
FIGURE 125
Configuring extended ACL
4. Provide the following information:
•
ACL ID / Name: Select one of the following options:
•
ID#: Enter the number to identify a collection of individual ACL entries. The range is
from 100 through 199. By default, ACL ID is enabled.
•
Name: Enter the name of the ACL.
•
Action: Click one of the following options:
•
Permit — Permits the packets that matches the ACL policy.
•
Deny — Denies the packets that matches the ACL policy.
•
Log: Select the check box to generate a system log entry for packets that are denied by the
ACL entry. This option is enabled when you choose Deny action.
•
Protocol Match: Select a protocol in the list to provide the type of IP packet you are
filtering.
•
Match established connections: Select the check box to enable the policy only to the
established TCP connections, and not to new sessions.
•
Remark: Enter the remark.