Brocade Virtual ADX Graphical User Interface Guide (Supporting ADX v03.1.00) - Manual (Page 272)

260 Brocade Virtual ADX Graphical User Interface Guide
53-1003242-01
Overview
B
Example 1
This example has several different uses of variables inside a repeater.
The variables with the default values are defined as follows:
The following repeater is for the real server creation:
The results of the variables and repeater are the real servers in the following table.
Real Server name IP Address Server ID
rs1 10.100.0.2 1201
rs2 10.100.0.22 1202
rs3 10.100.0.23 1203
<variables>
<variable>
<variableName>RS_NAMES</variableName>
<dataType>stringList</dataType>
<defaultValue>rs1, rs2, rs3</defaultValue>
</variable>
<variable>
<variableName>RS_IPS</variableName>
<dataType>ipAddressList</dataType>
<defaultValue>10.100.0.2, 10.100.0.22, 10.100.0.23</defaultValue>
</variable>
<variable>
<variableName>SERVER_ID</variableName>
<dataType>integerNonZero</dataType>
<defaultValue>1201</defaultValue>
<autoIncrement>true</autoIncrement>
</variable>
</variables>
<repeater count="RS_NAMES">
<real>
<name variable="RS_NAMES"/>
<ip variable="RS_IPS"/>
<realPorts>
<realPort>
<port>ssl</port>
<serverId variable="SERVER_ID"/>
</realPort>
</realPorts>
</real>
</repeater>