Actiontec electronic GE344000-01 - Manual (Page 15)

12
Actiontec Wireless Cable/DSL Router User Manual
4. In the next screen, read the recommendations. To perform an advanced setup
on the Router, click Begin Advanced Setup.
5. The “Configuring the Advanced Settings” screen appears. To check all the set-
tings, or if unsure of which settings to modify, select Next. To modify a specif-
ic configuration, click on its name in the menu bar on the left.
☞
Note: Click Save and Restart on the bottom left-hand side of
the screen after finishing the configuration of one or more of
the Advanced Setup settings.
WAN IP Address
Selecting WAN IP Address in the “Advanced Configuration” screen generates the
“ WAN IP Address” screen. WAN IP Address allows manual set up of the IP address
of the Router. There are three ways to do this: Obtain an IP Address through
PPP o E , Obtain an IP Address Through DHCP , and Specify a Static IP Address.
☞
Note: Some DSL providers use PPP o E to establish communica-
tion with an end user, while others use static IP . Cable modem
providers and other types of broadband Internet connections
(such as fixed point wireless) may use either
DHCP or Static IP
address. If unsure about which connection is present, check with
the Internet Service Provider (
ISP) before continuing.