Actiontec electronic GE344000-01 - Manual (Page 58)

55
Appendix B Configuring TCP/iP
15. Click the Bindings tab, select All Services from the “Show Bindings for” drop-
down list, and verify TCP/IP is bound to the Ethernet adapter, as shown below.
16. Select All Protocols from the “Show Bindings for” drop-down list in the
“Bindings” tab and expand all entries shown by clicking the plus signs (+).
Verify that both the
TCP/IP Protocol and WINS Client ( TCP/IP ) entries are
both bound to the Ethernet adapter.