Actiontec electronic GE344000-01 - Manual (Page 40)

37
Chapter 6 Troubleshooting
Unable to get an IP address from Cable/DSL Modem.
Ensure the Router is properly connected to the computer and is plugged in.
Turn off the cable/DSL modem and wait a few seconds. Turn the modem
back on, wait for it to go through its self-test, then check for the IP address.
Verify the modem is DHCP compatible.
Ensure the user name and password are entered for the cable/DSL modem
by using to the Router’s Web-based utility (see “Advanced Setup” for more
information).