Actiontec electronic GE344000-01 - Manual (Page 64)

61
Appendix B Configuring TCP/iP
Macintosh
The Router supports both the Classic Macintosh operating systems (9.2.1 and
below), as well as
OS X .
☞
Note: When installing any software, consult the user manual and
help files supplied with the software for detailed information.
Actiontec provides the following information as a guideline only.
Classic
To configure the Router, Open Transport 2.5.2 or above must be loaded on the
computer.
1. Click Apple, Control Panels, then TCP/IP .
2. When the “ TCP/IP ” window appears, select Edit from menu bar, then select
User Mode.
3. When the “User Mode” window appears, select Advanced, then click OK .
3. In the “TCP/IP” window, select Ethernet from the “Connect via” drop-down
list.