Static routing, Mac address cloning – Actiontec electronic GE344000-01 User Manual
Page 30
27
Chapter 4 Advanced Setup
Static Routing
Selecting Static Routing in the “Advanced Settings” screen generates the “Static
Routing” screen. Enter the addresses in their respective text boxes, then click Add.
The address will appear in the “Static Routing Table.” To remove an address, high-
light it by clicking on it in the Static Routing Table, then click Remove.
MAC Address Cloning
Selecting
MAC
Address Cloning in the “Advanced Configuration” screen generates
the “
MAC
Address Cloning” screen. A
MAC
(media access control) address is an
identifier unique to every networkable device. Some Internet Service Providers
(
ISP)
require a
MAC
address to validate a computer’s permission to be on their net-
work. If the
ISP
requires this information, obtain the
MAC
address of the computer
originally configured for the
ISP
(see Appendix D for instructions to determine the
computer’s
MAC
address). Enter the
MAC
address in the “User Select
WAN MAC
Address” text boxes in the “
MAC
Address Cloning” screen.