Actiontec electronic GE344000-01 - Manual (Page 77)

74
Actiontec Wireless Cable/DSL Router User Manual
Windows 2000
1. Click Start, Programs, Accessories, Command Prompt.
2. When the “Command Prompt” window appears, enter:
ipconfig /all
then press Enter on the keyboard.
3 A list of information about the Ethernet adapter appears.
4. Note the “Physical Address,” which is the MAC address of the installed
Ethernet adapter.
Windows NT 4.0
1. Click Start, Programs, Command Prompt.
2. When the “Command Prompt” window appears, enter:
ipconfig /all
then press Enter on the keyboard.
3 A list of information about the Ethernet adapter appears.
4. Note the “Physical Address,” which is the MAC address of the installed
Ethernet adapter.
Macintosh
1. Select Apple, Control Panels, TCP/IP .
2. In the “ TCP/IP ” window, click Info.
3. The “ TCP/IP Info” window appears. In the “Addresses” section, note the
“Hardware address,” which is the MAC address of the installed Ethernet
adapter.