3 correction factor – Hired-Hand Evolution Series Bird Scale Manual User Manual

Page 39

Advertising
background image

Part n° 890-00487 rev.00

Evolution Bird Scale Controller

39

Select the "8. Installation" menu

from the main menu then press

the right-arrow key. Note that this

menu is only accessible from the

installer mode.

Select the "3. Other Settings"

menu then press the right-arrow

key.

Press the down-arrow key to

select the "Uniformity Error ( - )"

menu.

Use the adjustment buttons to set

the Low Uniformity Error (in %).

Press the down-arrow key to select the "Uniformity Error ( +)" menu.

Use the adjustment buttons to set the High Uniformity Error (in %).

5.7.5.3 Correction Factor

The controller allows making slight adjustments to the average weight reading

of the scales. For instance, if the correction factor is 1%, the average

weight read by each scale is increased by 1 %.

Select the "8. Installation" menu from the main menu then press the

right-arrow key. Note that this menu is only accessible from the installer

mode.

Select the "3. Other Settings" menu

then press the right-arrow key.

Press the down-arrow key to select

the "Correction factor" menu.

Use the adjustment buttons to set

the Correction factor (in %).

8. Installation

3. Other Settings

8.3 Installation

Uniformity error(-)

25%

Min: 5 Max: 50

8.3 Installation

Uniformity error(+)

25%

Min: 5 Max: 50

8.3 Correction

Factor

6%

Min: 0 Max: 20

Advertising