Apple Network Setup - Manual (Page 131)

C H A P T E R 4
Network Setup Protocol Structures and Data Types
Protocol Structures 131
OTCfgRemoteDialing 4
The OTCfgRemoteDialing structure stores settings for outgoing ARA connections.
struct OTCfgRemoteDialing {
UInt32 version;
UInt32 fType;
UInt32 additionalPtr;
OTCfgRemoteRedialMode dialMode;
UInt32 redialTries;
UInt32 redialDelay;
UInt32 pad;
};
Field descriptions
version Depending how the preference was constructed, version
may be kOTCfgRemoteDefaultVersion or
kOTCfgRemoteAcceptedVersion . When reading the version
field, accept either value. When writing the version field,
set it to kOTCfgRemoteDefaultVersion .
fType Must be ‘dial’ .
additionalPtr Must be zero.
dialMode The redial mechanism to use. For possible values, see the
OTCfgRemoteDialMode (page 168) enumeration.
redialTries The number of times to redial if a connection cannot be
made. Only valid if
dialMode is not kOTCfgRemoteRedialNone .
redialDelay The number of milliseconds to wait before redialing. The
value of
redialDelay is only valid if dialMode is not
kOTCfgRemoteRedialNone .
pad A pad byte whose value must be zero.
The preference type for this preference is kOTCfgRemoteDialingPref , which is
defined as 'cdia' .