Apple Network Setup - Manual (Page 133)

C H A P T E R 4
Network Setup Protocol Structures and Data Types
Protocol Structures 133
allowAddressNegotiation
Must be 1.
idleTimerEnabled Set idleTimerEnabled to 1 to cause a connection that has
been idle for the number of milliseconds specified by the
idletTimerMilliseconds field to be disconnected. Set
idleTimerEnabled to zero to disable the idle timer.
compressTCPHeaders Set compressTCPHeaders to 1 to allow Van Jacobsen header
compression. Set compressTCPHeaders to zero to disallow
header compression.
idleTimerMilliseconds
The number of milliseconds to wait before disconnecting a
connection that is idle.
The preference type for this preference is kOTCfgRemoteIPCPPref , which is
defined as 'ipcp' .
OTCfgRemoteLCP 4
The OTCfgRemoteLCP structure stores information for configuring the Link
Control Protocol (LCP) layer of PPP. The information in this structure is used
for PPP connections and is ignored for ARAP connections. This information is
also used as part of a Remote Access server configuration.
struct OTCfgRemoteLCP {
UInt32 version;
UInt32 reserved[2];
char lowerLayerName[36];
UInt32 maxConfig;
UInt32 maxTerminate;
UInt32 maxFailureLocal;
UInt32 maxFailureRemote;
UInt32 timerPeriod;
UInt32 echoTrigger;
UInt32 echoTimeout;
UInt32 echoRetries;
UInt32 compressionType;
UInt32 mruSize;
UInt32 upperMRULimit;
UInt32 lowerMRULimit;