Lincoln Electric IM642 IDEALARC DC-600 - Manual (Page 51)

F-10 DIAGRAMS F-10
IDEALARC® DC-600
S22
980
ELECTRODE CABLE
-
+
14 PIN AMPHENOL
POWER SOURCE
TO WORK
AND 14-PIN CABLE PLUG, REAR VIEW
AND 14-PIN CABLE PLUG, FRONT VIEW
K=42
I=41
H=21
D=4
C=2
PIN
B C D E F
75 76 77 4 2
LEAD
42V AC 42V AC TRIGGER CIRCUIT
(SEE APPROPRIATE WIRING DIAGRAM)
FUNCTION
FUNCTIONS ARE LISTED FOR REFERENCE ONLY AND EACH MAY OR MAY NOT BE PRESENT IN YOUR EQUIPMENT.
14-SOCKET BOX RECEPTACLE, FRONT VIEW
14-SOCKET BOX RECEPTACLE, REAR VIEW
N.C. PINS NOT LISTED ARE NOT CONNECTED ON CABLE. N.A. WELDING CABLE MUST BE SIZED FOR CURRENT AND DUTY CYCLE OF APPLICATION.
G
21
H
41
I
42
J
M
F=76
E=77
G=75
N
L
A
B=GND
K=42
I=41
H=21
D=4
C=2
J
M
F=76
E=77
G=75
N
L
A
B=GND
9 PIN AMPHENOL
K
GND
CHASSIS CONNECTION WORK OUTPUT CONTROL OUTPUT CONTROL OUTPUT CONTROL TRIGGER CIRCUIT
Only qualified persons should install, use or service this machine. Do not operate with covers removed. Disconnect power source before servicing. Do not touch electrically live parts.
N.D. IF LEAD #21 IS TO BE CONNECTED TO THE TERMINAL STRIP, CONNECT TO THE #21 TERMINAL THAT MATCHES WORK POLARITY. THIS CONNECTION MUST BE CHANGED WHENEVER THE ELECTRODE POLARITY IS CHANGED.
10-30-98F
N.E.
N.E. ILLUSTRATION DOES NOT NECESSARILY REPRESENT
ACTUAL POSITION OF APPROPRIATE OUTPUT STUDS. MORE INFORMATION.
CONNECTION OF DH-10 OR LN-10 TO POWER SOURCE WITH 14 PIN AMPHENOL
REFER TO POWER SOURCE OPERATING MANUAL FOR
LINCOLN
WIRE FEEDER
WIRE FEEDER INPUT CABLE ASSEMBLY
N.B. DIAGRAM SHOWS ELECTRODE POSITIVE. TO CHANGE POLARITY, TURN POWER "OFF", REVERSE ELECTRODE AND WORK CABLES AT POWER SOURCE.
FOR PROPER SETTINGS OF SWITCHES ON POWER SOURCE, SEE POWER SOURCE OPERATING MANUAL.