Seca 757 - Manual (Page 71)

The seca 360° wireless network • 71
English
7.2 Operating the scale in a wireless group
All the functions required to operate the device in a
seca wireless group can be found in submenu “rF”.
For information on how to navigate in the menu see
page 65.
Activating the wireless
module (SYS)
The device is supplied with the wireless module disa-
bled. You have to activate it before you can set up a
wireless group.
NOTE
When the wireless module is activated, the
power consumption of the device will increase.
We recommend using a power pack when
operating the device in a wireless network.
1. Switch on the device.
2. Select the “SYS” menu item from the “rF” sub-
menu.
3. Confirm the selection.
4. Select the “On” setting.
5. Confirm the selection.
You exit the menu automatically.
Setting up a wireless
group (Lrn)
To set up a wireless group proceed as follows.
1. Switch on the device.
2. Call up the menu.
3. Select the item “rF” in the menu.
4. Confirm the selection.
Reg. Devices (MO)
• Channel 1 (C1)
• Channel 2 (C2)
• Channel 3 (C3)
Stop rF Group (ID)
Autosend
• On
• Off
Autoprint
• HI
• MA
• HI_MA
• Off
Time
• Year
• Month
• Day
• Hour
• Minute
……
System
• On
• Off
……
Learn