Seca 959 - Manual (Page 79)

seca 360° wireless Network • 79
English
Activate wireless
module (SYS)
The device is supplied with the wireless module disa-
bled. It has to be activated before you can set up a
wireless group.
NOTE:
When the wireless module is activated, the
power consumption of the device will increase.
We recommend using a power supply unit
when operating the device in a wireless net-
work.
1. Switch the device on.
2. Select the menu item "SYS" in the "rf" submenu.
3. Confirm the selection.
4. Select "on".
5. Confirm the selection.
You will leave the menu automatically.
Set up wireless group
(Lrn)
To set up a wireless group proceed as follows:
1. Switch the device on.
2. Call up the menu.
3. Select the item "rF" in the menu.
4. Confirm the selection.
5. Select the menu item "lrn" (learn) in the "rf" sub-
menu.
6. Confirm the selection.
The wireless group currently selected (here: wire-
less group 0 "ID 0") is displayed.
If the wireless group "0" already exists, use the
arrow keys to select another ID (here: wireless
group 1 "ID 1").
7. Confirm your selection for the wireless group.
The device will suggest a channel number for
channel 1 (here C1 "0").
You can either accept the channel number sug-
gested or select another channel number using the
arrow keys.
8. Confirm your selection for channel 1.