Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 167)

GPS Reference Manual
72
RTK data collection. If you are storing this point in the receiver file
only, then the point control is replaced with a simple edit box titled
Site ID. You can pick an existing point name when storing to the
receiver only.
Description : is where you enter the description for the next static
session or stop and go point.
Log Until Stop : is where you select to use a Duration or to record until
6WRS is tapped.
Duration : is where you enter the session length for the next
occupation.
Meas : is where you enter the measured height of the antenna for this
receiver.
6HWXS +5 : opens the Post Processing Antenna screen, which is
identical to the Base Receiver Antenna screen discussed on Page R-27
where the details of the antenna are defined.
6WDUW : instructs the receiver to mark the beginning of a static point
occupation with the entered Site ID and Description .
6WRS : instructs the receiver to mark the end of a static point
occupation.
6WDWXV : opens the GPS Status screen (Page R-68).
Receiver Information
6XUYH\ 5HFHLYHU ,QIR 
The Receiver Information screen is identical to the screen used when
running in RTK mode and is described on Page R-60.