Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 63)

RTK Data Collection
59
Recovering from Signal Loss
If Bluetooth communications failure occurs and the software is not
able to recover, you may need to uncheck and then re-check the
; Enable Bluetooth checkbox from the Bluetooth Device
Management screen. This screen is accessed from either of the
methods described in Step 3, under Configuring the Bluetooth
Settings, above.
Bluetooth Error Messages
Any of the messages displayed here will appear
whenever a screen is accessed that looks for a
Bluetooth connection and the connection is not
established. These errors are normal if the
connection has not yet been configured and
established as described above.
The last error message shown here will occur
after a Bluetooth connection was established
and then is suddenly lost. Tapping
2. will
dismiss the dialog and return you to the
current screen without a connection. Tapping
6HWWLQJV will open the Microsoft® Bluetooth
Device Management applet where you can
uncheck and re-check the
(QDEOH %OXHWRRWK
checkbox to reestablish the connection.