Spectra Precision Survey Pro CE v3.60 GPS User Manual - Manual (Page 84)

GPS User’s Manual
80
Reuse Localization Solutions
Objectives
This tutorial job will teach you:
• How to reuse a localization solution in a new job.
• How to select a Localization adjustment record from the
coordinate system database.
• How to use a control file.
Scenario
You want to return to the project site from the first tutorial to add
some new measurements. You want to use a new job file for this new
work, but you do not want to collect the control measurements again.
Procedure
1. Create a new job.
• Choose
1001 as the first point. Do not choose a point that
already exists in the control file, since we can not load the
control file if there are common point names in both jobs.
• Go to the Files card from the Job, Settings screen. And select
TDSControl_Ground.job as the control file
2. Set the projection.
• From the Survey Menu, tap 3URMHFWLRQ. On the Horizontal
card, tap
3URMHFWLRQ 6HWXS.
• Tap 3LFN IURP 'DWDEDVH to open the Localization Data Base
selection screen.
• In the
Data Base box, select View Sites . From the Site control,
pick the name you gave to the Localization site in the first
tutorial.
• Tap 2.. The Localization solution is now set.
3. Set up base and rover.
• Put the base station on point CHAP (or any other GPS
measured points from the control file) and SET the base.