Star Water Systems S1101 User Manual
Page 6
Advertising
6
Level to
within
1/8 in.
LOCATION SELECTION AND LEVELING OF TANK
NOTE: If a built in installation is to be used, locate pump
chamber in an area that will allow access to the pump &
switch.
1. Select a location which is readily accessible to the
existing discharge and vent lines.
1
2. Level tank to within 1/8 in. for length and width. Use
hydraulic cement or similar material for leveling.
CAUTION: Do not use wooden shims to level tank.
CAUTION: Ensure that nails, screws or other sharp
objects do not puncture tank
2
DIMENSIONS
IL1653
13-1/2
5-1/2
42-3/16
14-1/8
13-1/4
24-1/2
12-1/4
12-1/4
20-1/2
17
All dimensions are in
inches.
Advertising