Star Water Systems S1101 - Manual (Page 9)

9
Discharge
Pipe
Check
Valve
3. Install 2 in. shut off valve (not included) above the
check valve in discharge pipe.
Shut
Off
Valve
3
CONNECT TO PLUMBING
2
2. Install 2 in. check valve (included) in discharge pipe to
prevent back-flow.
CAUTION: Make sure the flow arrows on the check valve
are pointed up.
1. Install rigid 2 in. discharge pipe (not included) according
to local, regional and state codes. Use a 2-step PVC
glue system (not included) to join pipe and any fittings
needed.
CAUTION: Do not use a discharge pipe smaller than the
discharge pipe pre-installed in the system.
1