GW Instek PSW-Series User Manual - Manual (Page 51)

OPERATION
51
Using the Rack Mount Kit
Background The PSW series has an optional Rack Mount
Kit (GW Instek part number: [JIS] GRA-410-J,
[EIA] GRA-410-E[EIA]) that can be used to
hold 6x PSW Type I models, 3x Type II models,
2x Type III models or a combination of all
models (1x Type I, 1x Type II and 1x Type III).
Rack mount
diagram
Type I Type II Type III
How to Use the Instrument
Background The PSW power supplies use a novel method
of configuring parameter values only using the
Voltage or Current knobs. The knobs are used
to quickly edit parameter values at 0.01, 0.1 or 1
unit steps at a time.
When the user manual says to set a value or
parameter, use the steps below.
Example Use the Voltage knob to set a voltage of 10.05
volts.