GW Instek PSW-Series User Manual - Manual (Page 94)

PSW Series User Manual
94
Note
If the USB drive is not recognized, check to see
that the function settings for F-20 = 1 (page 106). If
not, reinsert the USB flash drive.
3. Configure T-03 (Test Export) to
0~10 (save memory slot)
Page 89
T-03 range 1~10
4. The script will now be copied to the USB flash
drive.
Note
Error messages: If you try to export a test script
from an empty memory location “Err 003” will be
displayed on the display.
Remove Test Script
Overview The Remove Test function will delete a test
script from the internal memory.
Steps 1. Select T-04 (Test Remove) and
choose which test script to remove
from the internal memory.
Page 89
T-04 range 1~10
2. The test script will be removed from the
internal memory.