GW Instek PEL-3000 Series Programming Manual - Manual (Page 108)

PEL-3000 Programming Manual
106
Syntax [:PROGram]:CHAin
{<NR1>|OFF, <NR1>|OFF, <NR1>|OFF, <NR1>|OFF,
<NR1>|OFF, <NR1>|OFF, <NR1>|OFF, <NR1>|OFF,
<NR1>|OFF, <NR1>|OFF, <NR1>|OFF, <NR1>|OFF,
<NR1>|OFF, <NR1>|OFF, <NR1>|OFF, <NR1>|OFF}
Query Syntax [:PROGram]:CHAin?
Parameter Parameters in
order: Description
<NR1>|OFF (1~16) Program no. that follows P01.
<NR1>|OFF (1~16) Program no. that follows P02.
<NR1>|OFF (1~16) Program no. that follows P03.
<NR1>|OFF (1~16) Program no. that follows P04.
<NR1>|OFF (1~16) Program no. that follows P05.
<NR1>|OFF (1~16) Program no. that follows P06.
<NR1>|OFF (1~16) Program no. that follows P07.
<NR1>|OFF (1~16) Program no. that follows P08.
<NR1>|OFF (1~16) Program no. that follows P09.
<NR1>|OFF (1~16) Program no. that follows P10.
<NR1>|OFF (1~16) Program no. that follows P11.
<NR1>|OFF (1~16) Program no. that follows P12.
<NR1>|OFF (1~16) Program no. that follows P13.
<NR1>|OFF (1~16) Program no. that follows P14.
<NR1>|OFF (1~16) Program no. that follows P15.
<NR1>|OFF (1~16) Program no. that follows P16.
Return Parameter <string> P1->XX;P2->XX;P3->XX;P4->XX;
P5->XX;P6->XX;P7->XX;P8->XX;
P9->XX;P10->XX;P11->XX;P12->XX;
P13->XX;P14->XX;P15->XX;P16->XX
Where XX = P1 ~ P16 or OFF
Example :CHAin 4,OFF,OFF,5,6,OFF,OFF,OFF,OFF,OFF,OFF,
OFF,OFF, OFF,OFF,OFF
Configures the program chain as follows:
P01→P04→P05→P06→OFF