GW Instek PEL-3000 Series Programming Manual - Manual (Page 117)

COMMNAND OVERVIEW
115
Return Parameter <string> Returns the next sequence in the
chain in the following format:
Chain:<NR1>|OFF
Example :NSEQuence:CHAin 2
Sets the next sequence in the chain as S02.
Query example :NSEQuence:CHAin?
>Chain: 2
Returns the next sequence in the chain (S02).
:NSEQuence:EDIT
Set
Query
Description Configures the parameters for the Data Edit for
Normal Sequence menu, equivalent to entering the
FUNC>Sequence>Normal Sequence>Data Edit
menu.
Syntax :NSEQuence:EDIT
{<NR1>,<NR1>,<NR2>,<NR1>,<NR1>,<NR1>,<NR1>
,<bool>|OFF|ON,<bool>|OFF|ON,<bool>|OFF|ON,
<bool>|OFF|ON}
Query Syntax :NSEQuence:EDIT?
Related
Commands :NSEQuence:
Parameter Parameters in order: Description
<NR1> Current step number
<NR1> Total number of steps
<NR2> Value
<NR1> Time: hours
<NR1> Time: minutes
<NR1> Time: seconds
<NR1> Time: milliseconds
<bool>|OFF|ON LOAD setting
<bool>|OFF|ON TRIG OUT setting
<bool>|OFF|ON RAMP setting
<bool>|OFF|ON PAUSE setting