GW Instek PEL-3000 Series Programming Manual - Manual (Page 49)

COMMNAND OVERVIEW
47
Parameter/
Return parameter
OFF or 0 Turns the Count Time
timer off.
ON or 1 Turns the Count Time
timer on
Example [:CONFigure]:CNTime ON
Turns the Count Time timer on.
Query example [:CONFigure]:CNTime?
>ON
Count Time is turned on.
[:CONFigure]:COTime
Set
Query
Description Sets or queries the load cutoff time. A cutoff time
of 0 seconds is the equivalent of disabling the
cutoff time.
Syntax [:CONFigure]:COTime {<NRf>[s] | MINimum |
MAXimum | OFF }
Query Syntax [:CONFigure]:COTime?
Parameter <NRf>[s] Cut off time in seconds
(1~3599999)
OFF Turns the cutoff time off.
MINIMUM or MIN Sets the cutoff time to the
maximum
MAXIMUM or MAX Sets the cutoff time to the
minimum
Return parameter <NR1> Returns the cutoff time
Example :COTime MAX
Sets the cutoff time to the maximum.
Query example :COTime?
>3599999
The cutoff time is set to3599999 seconds.