GW Instek PEL-3000 Series Programming Manual - Manual (Page 123)

COMMNAND OVERVIEW
121
Example :FSEQuence:RANGe IHVL
Sets the range to IHVL.
Query example :FSEQuence:RANGe?
>Range: IHVL
Returns the range.
:FSEQuence:LOOP
Set
Query
Description Sets or queries the number of loops for the
sequence.
Syntax :FSEQuence:LOOP {<NR1>|INFinity}
Query Syntax :FSEQuence:LOOP?
Parameter <NR1> (1~9999)Sets the number of loops
INFinity Sets the number of loops to infinite.
Return Parameter <string> Loop:<NR1>
Example :FSEQuence:LOOP 1
Sets the number of loops to 1.
Query example :FSEQuence:LOOP?
>Loop:1
Returns the number of loops(1).
:FSEQuence:TBASe
Set
Query
Description Sets or queries the Time Base.
Syntax :FSEQuence:TBASe {<NR2>[s]}
Query Syntax :FSEQuence:TBASe?
Parameter <NR2>[s] 0.000025 ~ 0.6s
Return Parameter <string> Returns the Time Base in the
following format:
Time Base:<NR2>
Example :FSEQuence:TBASe 0.3
Sets the time base to 300ms.