GW Instek GDS-800 Series Programming Manual - Manual (Page 15)

GDS-806/810/820/840 Programming Manual
14
Parameter
If the command has parameters, the values have to be included. In this manual,
when we expressed the syntax of the command, the < > symbols are used for
enclosing the parameter type. For instance, the syntax of the command in Figure
8-5 includes the Boolean parameter type
NOTE: Do not include the <, >, or | symbols when entering the actual value for
a parameter.
:TRIGger:DELay:MODe <Boolean>
Figure 3-4: Command Header with Parameter
Space
Parameter
Type
Table 3-1 defines the Boolean and other parameter types for the oscilloscope.
Parameter Type Description Example
Boolean Boolean numbers or values 1
0
NR1 Integers 0, 1, 18
NR2 Decimal numbers 1.5, 3.141, 8.4
NR3 Floating point numbers 4.5E-1, 8.25E+1
NRf NR1, NR2, or NR3 1, 1.5, 4.5E-1
Table 3-1: Parameter Types for Syntax Descriptions