GW Instek GDS-800 Series Programming Manual User Manual

Page 71

Advertising
background image

GDS-806/810/820/840 Programming Manual

70

:WMEMory<X>:DISPlay

Select whether the stored waveform will be displayed after being saved.

Syntax

:WMEMory<X>:DISPlay <NR1>

:WMEMory<X>:DISPlay?

Arguments

<X>

→Specify the location of RefA or RefB memory (1|2)

0

→OFF

1

→ON

Returns

<NR1>

:WMEMory<X>:ERASe

Select whether the stored waveform will be erased after being saved.

Syntax

:WMEMory<X>:ERASe

Arguments

<X>

→Specify the location of RefA or RefB memory (1|2)

:WMEMory<X>:LOCate

Set the position of stored waveform.

Syntax

:WMEMory<X>:LOCate <NR1>

Arguments

<X>

→Specify the location of RefA or RefB memory (1|2)

<NR1>

is the desired position. The rage is from –200 to +200.

Advertising
See also other documents in the category GW Instek Equipment: