4 radio description, 5 maintenance, 4 radio description 4.5 maintenance – In-Situ Aquaculture Buoy Manual (purchased before 28 May 2013) User Manual
Page 16
Advertising
![background image](/manuals/367688/16/background.png)
16
Buoy Transceiver
4.4
RADIO DESCRIPTION
The buoy system uses a 900 MHz spread-spectrum radio
manufactured by Digi
®
International Inc. The configuration of these
radios is site-specific and usually involves setting the following
parameters:
• Hopping Channel
• Destination Address
• Address Mask
• Module VID
• Sleep Mode
Refer to the Radio Replacement Instruction Sheet at www.in-situ.com
for information on how to modify these parameters.
4.5
MAINTENANCE
Replace the desiccant pack within the box regularly to ensure
continued functioning of the tranceiver and the RDO sensor.
Advertising
This manual is related to the following products: