In-Situ Aquaculture Buoy Manual (purchased before 28 May 2013) - Manual (Page 22)

22 Host PC
5.6 POND STATUS SCREEN—QUICK VIEW OF LAST 24 HOURS
The menu on the top of the Pond Status Screen offers the following
choices: Calibrate, Set Aerators, Set Phone Alerts, Status, and Setup.
FIGURE 15. Example of pond status screen
5.6.1 Calibrate
1. On the main menu of the Pond Status screen, select Calibrate.
2. Select the pond to be calibrated.
3. Use the up and down spinners at the right to increase or decrease
the oxygen reading until the desired level is set.
4. Click the Save button to complete the calibration.
FIGURE 16. Setting up a DO sensor calibration